Sync Cords

   
 

 

 

 








Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout


Paramount Cords
2564 Park Ave
Bronx, N.Y. 10451
ph.  718-401-0288
fax  718-401-0663

 

 

 

 

 


 



 All photos and text
Copyright © 2006
Paramount Cords & Brackets
____________________

 

 

We call this cable "The Saver" because every time you use it you save          
6 Volt Battery Cable and System for all your Speedlights
Low Cost, big savings !






Save on batteries... Saves your speedlights from damage


Replace your AA batteries or Turbo battery with Paramount's new "Saver" Battery cable.
Insert battery module into strobe until you feel the spring contact.
Tighten the two screws which makes the rubber ring expand thereby holding the module in place.
Since the rubber ring holds the module in the chamber, there are no telltale marks made. Most other companies who make
battery cables have metal pins that scratch the inside of the flash; this could be a problem when dealing with OEM warrantees.
 

Advantages:
Low cost. Complete systems are approximately $110 compared to $450+
Fits most Nikon and Canon strobes
Large number of flashes per charge
Lead-acid Gel batteries have no memory
Faster recycle times than AA batteries.
Safes strobe life.  Will not overheat your strobes like the High Voltage batteries do. eg. Quantum Turbo, Lumedyne Cyclers, Dynalite Jackrabbit.
Since batteries are only about $ 10.00 each you can keep 3 or 4 batteries in your bag for fast change.
Heavy duty design. Engineered not to make any marks on your strobe which voids warrantee.
 

Disadvantages:
Although recycle time is faster (3-4 seconds) compared to AA batteries (4-5 seconds) and High Voltage Turbo batteries (1.2 seconds).
Lead-acid gel cell batteries must be recharged immediately after use, if not this type of battery will degrade.

                                                                                                                     
Below: The battery module and cord                  Say Yes !, I want to buy "The Saver"     


Cat# PM-LVUniv     Fits all Canon and Nikon Speedlights except Nikon SB-600 

Cat# PM-LVSB600         Fits the Nikon SB600 only          

You receive the cable below with lugs attached to power any Nikon / Canon speedlight except Sb600 ( available shortly )

The battery module is injection molded directly to the cord
There is nothing to come apart or come loose assuring years of reliable use.
We mold the module on a Heavy-Duty 18 AWG polyurethane cable.
 



Buy the battery module cable (above ) from Paramount ( This is the heart of the system )

Buy the Gel Cell Battery  and the charger ( below ) from sources on the internet. We can provide the links.
The batteries can also be purchased from your local Home Depot or Security alarm store.


(1)                                                             (2)
                     




Buy an attractive camera bag to hold the battery and your system is complete.




 

Below: Battery module orientation Canon / Nikon strobes.

 

 

 

 

 

 

 

Since 19455