Click this graphic below to buy

Standard Cord list for Pocket Wizard     "Off the Shelf" cords ready to ship. PW-MA1 Elinchrom to Miniphone  16 Inches Straight PW-ME1-6P Miniphone to Metz 45cl,ct ( Metz 6) 16 Inches Straight PW-ME1-8P Miniphone to Metz 60ct1, ( Metz 8) 16 Inches Straight PW-MH1 Household to Miniphone  16 Inches Straight PW-MH10 Household to Miniphone  10 Feet Straight PW-MHSF1 Miniphone to Hot Shoe Female  with Shoe 1 Foot Straight PW-MM1 Miniphone to Miniphone  16 Inches Straight PW-MM6 Miniphone to Miniphone 6 Feet Straight PW-Wiz Double miniphone / HH Female / PC Female

PW-MOUNT    Pocket wizard bracket with Velcro 1/4 20 screw PW-MP1 1/4" Phono (Monolite) to Miniphone  16 Inches Straight PW-MP3  1/4" Phono (Monolite, Balcar) to Miniphone    PW-MPCF  PC Female Adapter to Miniphone PW-MS1  Sunpak (single pin) to Miniphone  16 Inches Straight     PW-MV1  Vivitar to Miniphone 16 Inches Straight PW-PC1  PC to Miniphone 16 Inches Straight PW-PC10   PC to Miniphone 10 feet Straight PW-PC16   PC to Miniphone  16 Foot Coiled PW-PC5 PC to Miniphone   5 foot Coiled PW-PC5H PC Long Tip to Miniphone 5 foot Coiled

Hot Shoe Female for 550/ 580ex             MPCF adaptor
  
                                                               

PW-MHSF1 Fits all flashes with shoe mount including Canon 550, 580EX fits all Nikon Flashes with hot shoe

Shoe Adaptor for MHSF1 1/4 20 threaded metal mount at bottom of the connector ( left ) Camera cold shoe with screw.  (above right ) $ 5.50 option * ( Already attached to cord if ordering PW-MHSF1 )

MPCF adaptor  Adaptor to convert all sync cords to fit Pocket Wizard Radio remotes.

These cords are used to trigger your camera connected to your Pocket Wizard Receiver.
 

About Pre-trigger cords ( No Switch )  
Pictures # 1 and # 2 ( above )
The Pre-trigger cord keeps the camera "awake" ready  for the shot. Same mode as pressing the shutter half way down. The only way to view your pictures is to unplug the cord from the camera.. Depending on the way you shoot you may or may not need the switch. The camera will remain awake and use up more power.
For Canon   $ 95.00 ea.       For Nikon $ 95.00 ea.

About Pre-trigger cords ( with Switch )  
Pictures # 3 and # 4 ( above )
This cord also keeps the camera "awake" ready  for the shot. When you want to view the photos, Switch off the pretrigger and the camera operates normally as if no cord were in the camera. You can now view and edit your pictures normally. Turn the switch back on, the camera focuses. You are ready for your next photo session. Turn switch off, camera is able to sleep saving power. Also less ware and tare on camera and cord from constant unplugging.
For Canon   $ 125.00 ea.       For Nikon $ 125.00 ea.

Cat# Wiz-mount


The only surface to mount the Pocket Wizard is the area by the battery door.
Most photographers cut Velcro and mosaic it around and on top of the door causing a sticky mess and hinder
the changing of the batteries. There is also the potential for damage to the door or door clip when removing
to replace batteries.
 
This is a flat bracket that attaches to the back of the Pocket Wizard.
This bracket allows you to securely mount the Pocket Wizard with a full 3 inch by 1 1/2 inch piece of Velcro.
This bracket is attached with a 1/4 20 screw ( supplied ).  Velcro is also supplied with this bracket.
Can be transferred from Pocket Wizard to another. Works with PW Plus T & R, and Multi Max T & R 's.
Protect your inuyvestment !  
buy oneprice  $ 22.00 ea         buy two( 2 ) for $40.00 

The battery door will open and close freely when attached.